Versión 1.2
3
SAFETY PRECAUTIONS
Warning: As this unit is used for heating, the well is a high-temperature zone. Avoid direct
contact and take all appropriate safety precautions.
While work is being done on the heating system, the unit must be disconnected from the mains
power supply.
Take precautions when removing food from inside the chamber, as the temperature inside the unit
may be very high.
INSTALLATION DIAGRAM
FOR CONNECTING TO MAINS
1- Remove the Phillips screws and extract the front with
the controls as indicated.
2-The inlet for connecting the mains cable is located at
the bottom.
ACCESS TO ELECTRICAL INSTALLATIONS
1-
Disconnect the unit from the mains
.
2-
Loosen the Phillips screws and extract the front
with the controls as indicated.
3-
In order to access the fan and the heating elements
terminals, remove the hexagonal M4 bolts with a
wrench and slide open the side panel.
