The hose must run
between the wall and
the bottom space at
the back of the dis-
hwasher (b1) so that
it is not squashed or
overstretched.
A fixed drain outlet at a
distance of 25 - 100 cm
from the floor is recom-
mended.
Make sure the drain tube
is not too tight and that
there are no bends or
kinks in it.
Please refer to the speci-
fication label on the top
edge of the door before
making the electrical con-
nections. Make sure that
the power voltage con-
nected to the plug socket
is as shown on the label.
b
If your dishwasher has a
hot water inlet, connect
the pipe to the hot water
tap.
In this case, the
maximum temperature
must not exceed 60ºC.
Bear in mind that this type
of water supply may affect
the washing and drying
capacity of the appliance.
b1
b2
max.
100 cm
min.
25 cm
It is very important for the bend pipe of the outlet hose is located securely in water outlet
so that it cannot disconnet. The operating water pressure (minimum and maximum) must
be between 0.5-10 bar (0.05-1 megapascals MPa).
I M P O R T A N T
3
ELECTRICAL CONNECTION
It is very important for the dishwasher to be connected to an earthed
plug socket. The electrical installation, plug, socket, fuses or circuit
breaker and meter must be capable of the maximum power shown
on the specifications label. If the power cable is damaged, it must be
replaced exclusively by the manufacturers, after-sales service (TAS)
or authorised personnel. If the appliance is to be recess-mounted
and integrated, the plug must be accessible after installation.
I M P O R T A N T
