• Notch™ harnesses are manufactured in accordance with EN
358:1999, EN 813:2008, ASTM F887 and are intended for use
as personal protective equipment only comply with the
requirements of ANSI Z133-12.
• This product is designed to be used by a person with a
maximum weight of 308 lbs when fully equipped.
• This harness is not designed to be used with a retro fit Fall
Arrest Harness.
• Notch™ harness is to be used for work positioning and
suspension only, NOT FOR FALL ARREST.
• In any case of fall arrest use a fall arrest system according EN
363. If you use a fall arrest system, it must be ensured that
the necessary free space in the work area beneath the user
(clear height) of 7 m is guaranteed.
• Retire and destroy the harness and all other personal
protective equipment if involved in a fall.
• Retire harness if it’s been seven or more years past the
manufacturing date.
• Only trained and experienced people under guidance and
supervision are allowed to make use of it.
• Users must be aware that poor physical and/or mental health
can jeopardise safety under normal conditions and in
emergencies.
• Prior to first use, the user should carry out a suspension test
in a safe place that the equipment is of the correct size, has
sufficient adjustment and is of an acceptable comfort level
• Before using the equipment, the user must ensure that, in the
event of falling into the personal protection equipment
system, the person caught can be rescued immediately,
safely and effectively. A rescue plan for all work operations is
recommended.
• In case of an emergency, an accident or loss of consciousness
prevent the victim from suspension trauma. Suspension
trauma can cause serious harm to health and death.
• Keep equipment from contacting with sharp edges, abrasive
surfaces, extreme temperatures, excessive ultra violet rays,
chemical agents, moving machinery, and electrical hazards.
Exposure to these elements may compromise the integrity of
the equipment.
• Always visually check that all buckles are properly closed.
• The large loop centered at the rear of the back pad is intended
for connection of harness suspenders only (Fig 4). Harness
suspenders are not safety products. Suspenders are
designed to support only the weight of the saddle and the
equipment it contains, NOT the individual.
Fig 4
10 kg max
Summary of Contents for Notch Sentinel
Page 1: ......
