©
2007 Edelbrock Corporation
Brochure No. 63-641530
Catalog #641530
Rev. 10/07 - AJ/mc
Page 1 of 5
RUSSELL GM LS1 COMPLETE FUEL SYSTEM
Catalog #641530
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new complete fuel system kit. If you have any questions, please call
our
Technical Hotline at: 1-800-416-8628,
7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
❑
1
Edelbrock Fuel Pump #1790
❑
1
Edelbrock Fuel Pressure Regulator Kit #1728
❑
1
Edelbrock Victor Jr. LS1 Fuel Rail Kit #3638
❑
1
Edelbrock Electric Fuel Pump Relay Kit #1795
❑
2
Russell 3/8” NPT x -6 AN male adapter
❑
2
Russell 3/8” NPT x -8 AN male adapter
❑
2
-8 AN dry sump union
❑
3
-6 AN dry sump union
❑
12
Tie wraps
❑
1
10 Micron fuel filter, -10 AN I/O
❑
1
Billet Y-block -10 AN inlet, -8 AN outlets
❑
5
-10 AN straight x -8 flare reducer
❑
20 ft.
Russell -8 hose
TOOLS & SUPPLIES RECOMMENDED
❑
Basic hand tools
❑
AN Wrenches
❑
Miscellaneous hardware for mounting components
❑
EFI fuel line disconnect tool
❑
Drill motor & bits
❑
Multimeter or test light
❑
Wire crimpers or soldering equipment
❑
Wire strippers
❑
Extra wire (Red & Black, 12 gauge & 18 gauge)
❑
Wire terminals & connectors
❑
10A inline fuse
❑
Assorted nuts & bolts
❑
20 ft.
Russell -6 hose
❑
10
Russell -6 cushion clamps
❑
10
Russell -8 cushion clamps
❑
3
-6 AN Straight hose end
❑
4
-8 AN Straight hose end
❑
1
-6 AN 45° Swivel hose end
❑
2
-8 AN 45° Swivel hose end
❑
2
-6 90° Swivel hose end
❑
4
-8 90° Swivel hose end
❑
10 ft.
Russell 3/16” Wrap-It wire protective sleeve
❑
10 ft.
Russell 5/16” Wrap-It wire protective sleeve
❑
1
Russell assembly lube/sealant kit
❑
1
Russell 0-100 psi fuel pressure gauge
KIT CONTENTS
WARNING!
Gasoline and gasoline fumes are extremely flammable. Work in a well-ventilated area away from open flames,
sparks, or other sources of ignition. Try to contain gasoline when connections are loosened, and clean up any
spills immediately. Failure to do so can result in a fire or explosion.
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in
poor performance and engine or vehicle damage.
