OPERATION
Align the brush head so the bristles face the
front of the handle. Firmly press the brush head
down on the metal shaft without twisting until it
clicks into place.
Use the USB cable and connect the charger with
the power adapter. Plug the adapter into a socket
and place the hand piece onto the charger. The
LED display will light up for about 10 sec. After-
wards all LED-lights will switch off. The Sonic
Generation
®
WINNER toothbrush is charging.
Pull the brush head off the handle without force
for replacement. Don‘t twist the brush head when
removing it from the handle as it may damage the
motor. Don‘t immerse the toothbrush handle or
the charger under water and do not leave the handle on wet surfa-
ces. Dry the toothbrush handle off with a soft cloth after brushing.
CHARGE - LEVEL INDICATOR
The charging takes about 12 hours. Charge the Sonic Generation
®
WINNER
toothbrush completely before first use.
The LED display will blink for 10 sec. if the device is removed from
or placed on the charger, or switched off.
Four blinking LED-lights indicate a fully charged battery.
If one single light is blinking the battery is charged less than 25%.
Don‘t keep the toothbrush handle on the charger base all the
time. Charge the toothbrush only when the charge-level is low, to
maximise battery life.
