Eddyfi Technologies TSC Amigo2, Getting Started

Page: 46 / 100

1 2 3 4 5 6 7 8 9
Software Overview
26 | www.eddyfi.com
The Analysis Ribbon
Once data has been collected it can be analysed.
Figure 20
The Analysis Ribbon
1. Replay
displays the collection of the current page of data as if it were a movie playback.
The replay can be stopped, paused and displayed slower or faster.
2. Size
is used for measuring the length and depth of an indication (see page 27).
3. Add region
is used to highlight sections of data (see page 29).
4. Print Page creates an automated one-page report for the current page of data (see
page 30).
5. Auto-Center
centers the signals in the middle of the screen, without changing the
screen scalings.
6. Auto-Fit
centers the data then changes the screen scaling, so the data fills the screen
without exceeding its borders.
Warning!
Large defects may look smaller than they
actually are, also small defects may look larger than they are. Signals are shrunk or
expanded to fit inside the screen boundaries. If this is the case, the Scalings Lost indicator
will be activated.
7. Default
uses the screen scalings specified in the probe’s configuration file.
8. Manual scaling allows the user to readjust the position and size of the signals by pinching
and swiping the touchscreen. This mode is automatically activated when any of the
signals are touched.
Warning! Large defects may look smaller than they actually are,
also small defects may look larger than they are. If this is the case, the Scalings Lost
indicator will be activated.
9.
X and Y
Field
toggle. Toggle between the X and Y-field.