31
5.
Quick release (QR) link
Use the lever on the quick release link to
release tension on the chain assembly
and introduce some slack. This helps
during the fitment, removal, and
repositioning of the chain.
6.
Fixed adjuster
Select from one of the available slots to
locate the pins of the fix adjuster link (7)
into. Choose a slot depending upon the
required chain tension. The fixed adjuster
is part of chain attachment block
assembly (10).
7.
Fixed adjuster link
Used to connect the first link of the chain
assembly to the fixed adjuster (6) part of
the chain attachment block assembly
(10).
8.
Small chain single wheel link
Used to create the chain assembly by
hooking over the next links wheel axle.
Select the required quantity of these links
depending upon the pipe O/D diameter
being inspected.
Flat View
Figure 23: LYNCS-CHAIN flat overview
9.
Removable handle
Used as an additional point of contact
for rotating of chain around pipe once
the tension has been set. They can be
attached onto any of the chain single
wheel link (8)(11) by screwing into the
threaded hole.
10.
Chain attachment block assembly
Used to mount the chain assembly to the
scanner frame. The chain attachment
block slides onto the scanning frame and
locked into place by engaging the cam
lever.
11.
Medium chain single wheel link
Used to create the chain assembly by
hooking over the next links wheel axle.
Select the required quantity of these links
depending upon the pipe O/D diameter
being inspected.
