10
1.
Outer Tool Posts
Wedge tool posts that mount to the outside of the scanner frame. Outer tool posts have a single rail
mounting point.
2.
On Board Controls
Use this button for
Pause / Resume
functionality.
To use
Pause / Resume
functionality, ensure encoder cable is plugged directly into the instrument and
scanner. Do not connect the adapter cable. Connecting the adapter cable will enable
Increment / Encoder
Reset
functionality.
*Adapter supplied with LYNCS-FULL, LYNCS-CM.
3.
Tool Post Clamp
Used to hold the tool post in place.
To engage tool post clamp, turn lever up to vertical position:
To disengage tool post clamp, turn lever down to horizontal position:
Ensure tool post clamps are disengaged (levers down) prior to moving the tool post.
