Eddyfi Technologies Ectane 3, User Manual, Page: 46 / 66

46
3. ENCODERS Connector (18 pins)
The ENCODERS connector allows the instrument to send and receive various signals such as
the acquisition start and stop commands, the encoder and rotation synchronization signals,
the relay outputs, etc.
Description 18-pin, female, shell 14 connector
Manufacturer, number Amphenol 58-570124-18S
Suggested cable connector ITT Cannon, KPT06B14-18P
or
Amphenol PT06J-14-18P
Figure 3-1 – Encoders connector
Table 4 – Encoders connector pinouts
Pin I/0 Signal Description
A TTL Input
Φ
B1 Phase B axis 1
B Output CLK_ACQ_OUT Acquisition clock output (open drain with
(open drain with 10 kΩ pull -up)
C TTL Input
Φ
A2 Phase A axis 2
D - GND Encoders ground
E TTL Input Input 1 User-defined input for software and
hardware function activation
F TTL Input Input 3 User-defined input for software and
hardware function activation
G TTL Input Input 2 User-defined input for software and
hardware function activation