Page 7
VAC-100-I-0315
E-SPTS-I-0809
800-638-3326 • edcoinc.com • [email protected]
EQUIPMENT DEVELOPMENT CO., INC.
GETTING STARTED WITH YOUR NEW VAC 100
VORTEX 100 STANDARD INSTRUCTIONS:
FILTER INSTALLATION
6HDWWKH¿OWHULQWRWKH¿OWHUVKDNHU
insert, being sure to keep the black
mesh in tact between each insert.
3ODFHLQWKH¿OWHUFDJHKRXVLQJ
spacer assembl making sure to
NHHSWKHJURXQGZLUHÀDW
&RQQHFWWKH¿OWHUKRXVLQJVSDFHU
assembly ground wire from the
base via push on terminal.
Install the handle bar bracket
screws with a 5/32 hex-wrench
until the brackets are secure.
Connect the motor ground wire
from the subsequent assembly via
the push-on terminal.
Place the motor deck onto the
housing.
Place the vacuum under pressure
E\EORFNLQJWKHLQOHWZLWKDÀDW
and rigid material, and turn on the
vacuum.
Install all of the housing
component socket truss screws
with a 5/32 hex-wrench with the
vacuum under pressure.
NOTE:
8VLQJDQREMHFWWRGLVORGJHPDWHULDOPD\WHDUWKH¿OWHU&RQVXOW\RXU('&2UHSUHVHQWDWLYHLIPDWHULDOEORFNDJHLVH[FHVVLYH'RQRWXVHKLJK
SUHVVXUHFRPSUHVVHGDLURUZDWHUWRFOHDQRII¿OWHUDVPDWHULDOPD\EHFRPHSHUPDQHQWO\ORGJHGLQWR¿OWHUPHPEUDQH
