Page 4
VAC-100-I-0315
800-638-3326 • edcoinc.com • [email protected]
EQUIPMENT DEVELOPMENT CO., INC.
GETTING STARTED WITH YOUR NEW VAC 100
VORTEX 100 STANDARD INSTRUCTIONS:
START-UP OPERATION
NOTE: 1.
This machine is to be operated for
Dry use only
. Using this machine in an wet environment will damage the machine,
2.
'RQRWXVHWKLVPDFKLQHVWRYDFXXPVKDUSREMHFWVDVWKRVHREMHFWVFDQGDPDJHWKH¿OWHUZKLFKZKLFKZLOODOORZGXVWWRJHWLQWRWKH
motor, 3. Be sure to check the dust pan during operation. When pan is 3/4 full, it should be emptied out.
Pull up on the dust pan lever to
release the dustpan. Check that
the dustpan is completely empty
then replace.
Connect the machine to the proper
power source, as indicated on the
machine’s serial tag.
Start the machine by pushing
the power switch to the ON / (I)
position.
Turn the machine off by pushing
the power switch to the OFF / (O)
open position
Before and after every use, the
¿OWHUVKRXOGEHVKDNHQP\PRYLQJ
the shaker bar in and out rapidly
for 10 seconds.
You should empty the dustpan
after every use as well.
CAUTION:
The electrical service at the installation site must supply the voltage stamped on the machine’s serial tag. Most motors have multiple
YROWDJHFDSDELOLWHVWKDWPD\DSSHDURQWKHPRWRUWDJEXWGRQRWDSSO\WRWKHVSHFL¿FPDFKLQH2SHUDWLQJDWDQLQFRUUHFWYROWDJHPD\GDPDJHWKH
machine. See the EDCO serial tag for proper machine voltage.
