6
REV. 03/2015
TILLERHEAD
8.
Connect the both electrical plugs.
9.
IMPORTANT-FINAL CHECK
Test all the features of the semi-electric pallet
truck before this step. The handle should be
pumped with full strokes to prime and eliminate
air in the system.
The up/down lever should be checked at the
handle’s lowest position for this puts the most
tension on the chain. Once the
p a l l e t t r u c k i s a d j u s t e d p r o p e r l y a n d i s
performing well, drive in the second cotter pin.
10.
Tie the wire harness with a tie wrap(see arrow 1)
together .
Figure
01308
Figure
01309
Figure
01310
1