Eczacibasi VitrA V-Care Basic 5674/431465, User Manual

Page: 45 / 148

Place WATER GUARD between the seat and WC. ( A )
Press WATER TEMP+SEAT TEMP button on
the remote control for 3 seconds to start Decalcification.
(A single beeping sound will start from this moment)
Nozzle will be extracted. Then water will be dumped
through the nozzle into the bowl for 20 seconds.
When water dumping stops, ( B ) open the Decalcification
cover and ( C ) insert funnel through the opening.
( D ) Pour the entire decalcification solution into the funnel
slowly and remove the funnel when pouring is finished,
close the cover.
(A double beeping sound will start from this moment)
Wait for about 3 minutes. During this time, the
decalcification solution will soften the calcium build-up
within the tank.
After 3 minutes up, V-Care will perform the following;
3 cycles each of 40 seconds of REAR W 40
seconds of FEMALE W 40 seconds of
NOZZLE CLEANSING.
(A single beeping sound will start from this moment)
Nozzle retracts to its' original position and
decalcification is concluded. Remove the water guard.
(The beeping sound stops) The complete descaling
process does not take longer than 10 minutes.
Do not pour more than one bottle (125 ml)
decalcication solution inside the product
for one decalcication cycle.
Clean remaining water on the product after
decalcication cycle with a soft cloth
Do not use sharp objects for opening
decalcication hole cover
Decalcication cycle must be applied every
four months (3 times) in a year
Please clean the funnel with water before
decalcication cycle application to prevent
dust, dirt etc.
Do not use any liquid other than the Durgol
descaling agent supplied with the product.
!
A
B
C
D
Basic maintenance
How to apply Decalcication Cycle
+
EN
44