Eczacibasi VitrA V-Care Basic 5674/431465, User Manual

Page: 42 / 148

Deodorization
ON/OFF
Press to turn ON or turn OFF
the automatic deodorization.
(Located on the right
side-control)
While the it's is ON, deodorization automatically
activates whenever the seat sensor senses the user.
Then it turns off 1 minute after the user leaves the
seat.
Press to turn ON or turn OFF the
motion sensor.(Located on the
right side-control)
While it's on, the seat cover opens automatically when
it senses the user approach V-Care.
When no movement is detected for 90 seconds, both
seat and seat cover closes automatically.
Motion
sensor
ON/OFF
Nozzle
ejection
Press rear and female
washing together for 3
seconds to eject the nozzle
for manual cleaning of the
nozzle.
Press stop to return the nozzle to its original position.
The rear and female washing buttons on the left
side-control can also be used for the same purpose.
+
Pres and hold
for 3 seconds
Burn
prevention
V-Care is equipped with low
temperatureburn prevention
to protect children, elderly
and the disabled from burning
themselves without knowing.
When seat temperature remains over 38ºC for more
than 10 minutes, low temperature burn prevention
automatically activates to lower the seat temperature
to below 38ºC.
Power
saving mode
Press the stop button on the
remotecontrol for 3 seconds
to set V-Care onpower saving
mode.
A beeping alarm will signal the start of power saving
mode.To end power saving mode, press and hold the
stop buttonfor 3 seconds again(another beeping
alarm will sound tosignal the end of power saving
mode).
Pres and hold
for 3 seconds
When power saving mode os
ON,the seat and water
temperature will be
automatically set to 24ºC
when not in use.
Power saving mode turns off automatically when the
usersits on the seat, returning the temperature
setting to the previous user's settings. 10 minutes
after the user leaves the seat, the power saving
mode turns back on to return the temperatures
back to 24ºC
Power
saving mode
Seat sensor
The user's skin trggers the
seat sensor. When the seat
sensor acknowledges
theuser, V-Care then goes
into "ready" mode.
None of the function works while the seat is
unoccupied(except for automatic seat & seat cover
for Comfort version).The sensor is located on the 5
o'clock position of the seat.
V-Care is equipped with freeze
prevention to prevent water in
the tank from freezing during
cold weather.
When water temperature reaches below 5ºC, the
freeze prevention automatically activates.
Freeze
prevention
Seat
Additional functions
EN
41