en
4
transmitter
Frequency 2.4GHz
Modulation
DSM, DSM2, Marine
Battery
AA x 4
servo
Power Supply
4.8V~6V (shared with receiver)
Output Torque
199.8 oz-in (8.5 kg-cm)
Operating Speed
0.20 sec/60 degrees of travel
Size
55.6 x 18 x 30mm
electronic speed control (esc)
Input Voltage
7.4–14.8V
Constant/Peak
130 A/760 A
Resistance
0.0004 Ohm
Overload Protection
Thermal
BEC Voltage
6V/3 A
Size
53.5mm x 36mm x 36mm
Weight
79 g
1
Included Items
1. ECX
™
Revenge Type e
™
1/8-scale Buggy
2. Spektrum
™
DX2E transmitter
• 3 degree rear toe set
• Shock spacers
• Turnbuckle wrench
• L-wrenches: 1.5mm, 2mm, 2.5mm
needed to complete
• DYN4108 Prophet
™
Sport Duo
Li-Po 50Wx2 Dual Battery Charger
• Dynamite
®
Gold Series
2S or 3S Li-Po Battery
2
POWER
ST. TRIM
TH. TRIM
ST. RATE
VehIcle PreParatIons
1. Slide the panel open on the bottom of the
transmitter.
2. Obey the battery plus (+) and minus (-) diagram
in the transmitter to install 4 AA batteries.
3. Slide the panel closed.
We recommend using only alkaline AA batteries
in the transmitter, however, it is possible to use
rechargeable Ni-MH batteries.
cautIon:
If using rechargeable batteries, charge
only rechargeable batteries. Charging non-rechargeable
batteries may cause the batteries to burst, resulting in
injury to persons and/or damage to property.
InstallIng transMItter BatterIes
3
1
2
coMPonents
sPecIfIcatIons