CleanCUBE User Manual
8
4. Transportation and Selection of Installation Site
4.1 Initial Inspection
Upon receiving your CleanCUBE, perform a visual inspection of the packaging before
accepting the delivery from the shipping company. If the packaging appears to be damaged
or in poor condition, unpack the unit and inspect it for possible damages in front of a
representative from the shipping company.
If there is any visible damage, mark “damaged” on the freight receipt and save an image or
a video of the damage. After inspecting the unit, check to see if all parts and components
have been delivered with the unit.
4.2 Transportation
You can use a forklift (if the unit is on a pallet) or a hand truck to move the CleanCUBE to
its required installation location. If the CleanCUBE is delivered on a pallet, use a forklift to
move it to the installation location. When using a
forklift, make sure to
adjust the forks so
that they are as wide as possible while
on the
pallet. To ensure the safety of the unit
during
delivery, refer to the following directions:
The product must be carried by at least
2 people. Due
to the nature of the
product – center of mass is relatively high – a small tilt can lead to a tipping-over
incident. Please pay close attention.
