![Ecube Labs CleanCUBE 2 User Manual Download Page 17](http://html1.mh-extra.com/html/ecube-labs/cleancube-2/cleancube-2_user-manual_2356971017.webp)
CleanCUBE User Manual
17
If you clean the product interior with high water pressure, the water may reach
the product’s electronics and cause a malfunction.
6.4 Quarterly and Annual Maintenance
After installing CleanCUBE, quarterly maintenance checks are recommended. Here is a
checklist:
1.
Check that the locking device on the front door is operating appropriately.
2.
Check the levelling of the unit and change the adjustable feet as necessary.
3.
Check the polycarbonate top cover for any scratches, fractures, or damages.
4.
Check that there are no obstructions to the solar panel.
5.
Perform a manual compaction to confirm that the unit is operating properly.
6.
Check the product’s status through remote inspection with the manufacturer’s assistance.
7.Regulatory Notices
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
•
Connect the equipment into an outlet on a circuit diff erent from that to which the
receiver is connected.