CleanCUBE User Manual
14
After installing the battery please follow the instructions below to turn on the product.
1.
Open the front door and then open the top cover.
2.
Locate the ON/OFF switch and turn the unit ON.
3.
Wait 1~2 minutes for the status indicator light to turn on (system is booting).
4.
When the status indicator light flashes green quickly, wait another 1~2 minutes (communicating).
5.
After communication is complete, the status indicator light will change to a slow flash. The color will
reflect the fill-level status.
5.4 Initial Operational Inspection
After turning the product on, check that the product is operating properly. Please follow the
instructions below and perform the following operations:
1.
Open the front door and check that the status indicator light shows “door open”.
2.
Close the front door and check that the indicator shows the appropriate fill-level.
The product measures the fill-level after the front door is opened and closed. It
shows different colors on the indicator according to the measured fill-level.
Follow the instructions below to perform a manual compaction:
1.
Open the front door and then open the top cover.
2.
Press the Down (green) button. This triggers the compactor to move down. The compactor
automatically stops once it is fully extended.
3.
Press the Up (blue) button. This triggers the compactor to move up. The compactor automatically
stops once it returns to its original resting position.
4.
Once the compactor is in its original resting position, press the Down (green) button again to trigger
the compactor to move down.
5.
Instead of letting the compactor stop automatically, press the Stop (red) button when the compactor
is halfway down.
6.
Press the Up (blue) button to move the compactor back up to its original resting position.
7.
Close the top cover and front door.
Release the Up or Down buttons after pressing it. Do not hold the buttons down
for an extended period of time.
6. Product Use and Maintenance
