ECTACO
®
Partner
®
ER900
User Manual
9
•
Connect the AC/DC adapter to your device via the mini-USB port (see
General View
),
or connect your device to your PC using the special USB cable. The red LED signal
shows that the battery is recharging.
LED status: blinking blue – recording is in progress or data being transferred; blinking red
– the battery is critically low.
Note:
Charge the battery overnight prior to the first use of the device.
SD Card
Before you start using your ECTACO
®
Partner
®
ER900, please make sure the SD card
(included in the standard package) is installed into the
SD slot
of the device. If the card is
not installed, slide it into the slot located on the right-hand edge of the device – the label
of the card face up, contacts face down. Push the card gently until it clicks into place. To
eject the card, just push it in slightly.
ECTACO
®
Partner
®
ER900 supports SD and SDHC cards.
PC Communication
The
PC Communication
function allows you to manage files and folders stored on the SD
card. For example, you may wish to add books and music files.
•
Ensure the SD card is installed into the device.
•
Turn the device on.
•
Connect the device to your PC using the special USB cable and the mini-USB port
located on the device (see
General View
). Shielded cables must be used with this
device to ensure compliance with the class B FCC limits.
Please wait while your PC detects the device.
•
In the menu that appears on the device screen, select the desired connection mode:
battery charging or data transfer.
•
Navigate to the newly detected removable disk on your PC to browse through the files
stored on the SD card.
Note:
Do not modify the content of the
system
folder. Do not delete system files.
•
Copy your files to the respective folders. For example, copy your books to the
My
books
folder.
Note:
Always back up your important data! Neither the manufacturer nor the dealers
assume any responsibility for lost or corrupted data.
