ECTACO
®
Partner
®
ER900
User Manual
42
The next maneuver is shown at the upper left of the screen. By tapping the triangle in the
upper left corner, this display may be closed.
– distance to destination.
– expected time of arrival.
– estimated
time to go.
Show the present position in the center of the screen.
Display the map with cardinal direction North at the top of the screen.
Shows the reception quality of the GPS signal and the status of the
battery. Tap this item to switch between guidance with map, guidance with speedometer,
and the GPS signal screen.
The name of the street/road/square after the next maneuver is shown at the bottom of the
screen.
•
To change the content, just tap the control.
Note:
The program recalculates the route in case of a wrong maneuver.
Saving your routes
Routes are recorded independently of the mode (guidance or simply driving with GPS
active).
•
Tap
to start recording.
•
Tap
to stop recording.
•
Tap
and then select
GPS logs
in the menu that appears. You will see a list of
routes you saved.
•
Select the desired route and then tap
. You will see a menu with the following
items:
Delete GPS log
,
Speed graph
,
Altitude graph
,
Convert to KLM
.
Changing destination and adding waypoints
•
Tap
.
•
Select the search options and then select the desired item in the search results list.
Add a destination
– set the chosen location as destination, calculate the route and start
guidance.
Add a via point
– add location as a waypoint on the existing route.
