ECTACO
®
Partner
®
ER900
User Manual
10
Initialization
In the rare event that the data on the screen is corrupted or a program is not responding
properly, you will need to perform a reset.
The
Reset
button is located on the back of the device.
•
Press the
Reset
button with the tip of the stylus. Never use a needle or a pin since it
can damage the device.
On completion of the reboot, you will see the calibration screen with five targets,
appearing one after another as you tap them with the stylus.
Electrostatic discharge may cause failure of the device. Please use the Reset button to
restore full functionality of the device.
Keyboard
The standard keyboard allows you to enter any word just in seconds. Each set of national
characters is linked to its language input mode.
The function and control keys are described below.
Note:
Key1+Key2 here and further on signifies the combination of keys to use – first
press and hold Key1, then press and release Key2.
Key Function(s)
Turn the device on or off
Reset Re-initialize
system
Use speech recognition (where available)
Show or hide the pop-up toolbar
or
+
Listen to the pronunciation of the translation or source item
(where available)
Close active window / Cancel
Delete character to the left of cursor
+
key
Press and hold this key down to type in uppercase / Enter
additional letters or symbols
+
,
Launch spell-checker
