Ectaco Partner EFR430T, User Manual

Page: 18 / 63

ECTACO Partner
®
EFR430T User Manual
18
Creating a Rec ord
To open a new record template, press ENTER when you are in the record
list. If there are no records stored, a new record template will be opened
automatically when you enter the record list.
The first page of a record includes information on Date , Time and the audible
Reminder .
Date and Time specify the moment of the Schedule alarm operation.
The Reminder specifies the time period until a Schedule alarm will be issued.
The second page – Content – includes information about the event.
Set the date and time and specify the time period until a Schedule alarm will
be issued.
Press ENTER to open the Content page and fill it out.
Press ENTER to save a record.
The Schedule memory is limited to 50 records. The Not enough memory
message is displayed when the record list is full.
Finding a Record
The records are sorted by date and time. Use u , t to scroll the record list.
Reminder and Sc hedule alarm
If enabled, the Reminder sounds at the determined time until a Schedule alarm
will be issued, producing an audible beep. The Reminder is turned OFF by
default for a new record. The Reminder time is adjusted separately for every
individual record.
Reminders and Schedule alarms sound even if the device is OFF.
If a Reminder and a Daily alarm are timed to go off for the same time, only
the Reminder will be displayed since it has higher priority. The corresponding
Schedule record will be displayed in the view mode at this time.
Press any key to interrupt a Schedule alarm or a Reminder beep.
You can change the record and set the Reminder for a later time. Closing the
Schedule reminder window will bring you back to the section (for example,
Dictionary ) as you were before the alarm went off.