ECS TIGT-I2, Manual

Page: 30 / 68

26
Using BIOS
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Help Item
TM Status TM1
Limit CPUID MaxVal Disabled
Intel XD Bit Disabled
Hyper-Threading Technology Enabled
Quick Power on Self Test Enabled
Boot Up Numlock Status On
APIC Mode Enabled
1st Boot Device Hard Disk Drive
2nd Boot Device CD/DVD
3rd Boot Device Removable Dev.
Hard Disk Drives Press Enter
Boot Other Device Yes
Security Check Setup
ECS eJIFFY Function Disabled
: Move
F10: Save ESC: Exit
Enter : Select +/-/: Value
F9: Optimized Defaults
F1: General Help
TM Status (TM1/TM2)
This item shows TM function status if CPU can support TM function.
Limit CPUID MaxVal (Disabled)
Use this item to enable or disable the Max CPU ID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Disabled for WindowsXP
Hyper-Threading Technology (Enabled)
This item is only available when the chipset supports Hyper-Threading and you
areusing a Hyper-Threading CPU.
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.