manualshive.com logo in svg

ECS P4VXASD, Manual, Page: 61 / 66

Share
Download
ECS P4VXASD Manual Download Page 61

 

55 

2000/ME/98SE and Windows NT. Check the readme.txt and 
install the appropriate anti-virus software for your operating 
system.   

We strongly recommend users to install this free anti-virus 
software to help protect your system against viruses. 

Note:

  Update your virus software regularly to protect 

against new viruses. 

MediaRing Talk – Telephony Software 

To install the MediaRing Talk voice modem software for the 
built-in modem, go to the directory \UTILITY\MEDIARING 
TALK, then run MRTALK-SETUP72.EXE. 

Super Voice – Fax/Modem Software 

To install the Super Voice voice, fax, data communication ap-
plication for use with the built-in fax/modem, go the directory 
\UTILITY\SUPER_VOICE, then run PICSHELL. 

CD Ghost 

The CD Ghost software enables you to create a virtual cabinet 
of CD-ROM drives on your system to help you categorize and 
organize your CD collection. A user-friendly interface assists 
you in quickly creating images of both CDs and DVDs onto 
your system. To install the software, run SETUP.EXE from the 
following directory: 

\UTILITY\CDGHOST\ENG\CDGHOST 

Recovery Genius 

The Recovery Genius software program is an innovative win-
dows application system that protects your hard disk drive 
from virus intrusion, accidental deletions and from system cor-
ruption. To install the Recovery Genius software program run 
SETUP.EXE from the following directory: 

\UTILITY\RECOVERY GENIUS\ENG\RECOVERYGENIUS 

 

Summary of Contents for P4VXASD



































































Reviews:

No comments