43
Standby Time Out (Minute)
This sets the timeout for Standby mode in minutes. If the time
selected passes without any system activity, the computer will
enter power-saving Standby mode.
Suspend Time Out (Minute)
This sets the timeout for Suspend mode in minutes. If the time
selected passes without any system activity, the computer will
enter power-saving Suspend mode.
Resume on Ring
The system can be turned off with a software command. If you
enable this item, the system can automatically resume if there
is an incoming call on the Modem. You must use an ATX
power supply in order to use this feature.
Resume on LAN
The system can be turned off with a software command. If you
enable this item, the system can automatically resume on
LAN. You must use an ATX power supply in order to use this
feature.
Resume on PME#
The system can be turned off with a software command. If you
enable this item, the system can automatically resume if there
is an incoming call on the Modem. You must use an ATX
power supply in order to use this feature. Use this item to do
wake-up action if inserting the PCI card.
Resume on KCB Wake up key/Wake up password
If you enable this item, system can automatically resume by
pressing hot keys on the keyboard or typing in the password.
You must enable the Keyboard Power On jumper and use an
ATX power supply in order to use this feature.
Resume on RTC Alarm/Date/Hour/Minute/Second
The system can be turned off with a software command. If you
enable this item, the system can automatically resume at a
fixed time based on the system’s RTC (realtime clock). Use
the items below this one to set the date and time of the wake-
up alarm. You must use an ATX power supply in order to use
this feature.