
49
Change Password
If you highlight this item and press Enter, a dialog box appears
that you can enter a Supervisor password. You can enter no
more than six letters or numbers. Press Enter after you have
typed in the password. There will be the second dialog box
asking you to retype the password for confirmation. Press En-
ter after you have retyped it correctly. Then, the password is
required for the access to the Setup Utility or for it at start-up,
depending on the setting of the Password Check item in Ad-
vanced Setup.
Exit
Highlight this item and press Enter to save the changes that
you have made in the Setup Utility configuration and exit the
program. When the
Save and Exit dialog box appears, press
Y to save and exit, or press N to exit without saving.
This concludes Chapter 3. Refer to the next chapter for information on
the software supplied with the mainboard.