28
Motherboard User’s Guide
Init Dispaly First
This item allows you to choose the primary display card.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
Resume On RTC Alarm
The system can be turned off with a software command. If you enable this item,
the system can automatically resume at a fixed time based on the system’s RTC
(realtime clock). Use the items below this one to set the date and time of the
wake-up alarm. You must use an ATX power supply in order to use this feature.
Resume By PS/2 KB (S3)
This item enables or disables you to allow keyboard activity to awaken the
system from power saving mode.
Press <Esc> to return to the main menu setting page.
Resume By PS/2 MS (S3)
This item enables or disables you to allow mouse activity to awaken the system
from power saving mode.
This page sets up some parameters for devices installed on the PCI bus and
those utilizing the system plug and play capability.
PCI / PnP Setup Page
Press <Esc> to return to the main menu setting page.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
PCI / PnP Setup
Init Display First
Allocate IRQ to PCI VGA
Yes
Help Item
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
Select which graphics
controller to use as the
primary boot device.
PCI