25
Chapter 3: BIOS Setup Utility
Press <Esc> to return to the main menu page.
Configure DRAM Timing by SPD
When this item is set to enable, the DDR timing is configured using SPD. SPD
(Serial Presence Detect) is located on the memory modules, BIOS reads informa-
tion coded in SPD during system boot up.
VGA Share Memory
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
DVMT Mode Select
This item allows you to select the DVMT operating mode.
DVMT/FIXED Memory
When set to Fixed Mode, the graphics
driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
HPET
This item enables or disables HPET (High Performance Event Timer) support.
This page sets up some parameters for peripheral devices connected to the
system.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Help Item
DISABLED: disables the
integrated IDE
Controller.
ENABLED: enables both
Controllers.
Integrated Peripherals Page
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Load Default Settings
Onboard IDE Controller
Enabled
OnBoard SATA Controller Enhanced
Onboard LAN Function Enabled
Onboard LAN Boot ROM Disabled
Onboard AUDIO Function Enabled
Serial Port1 Address
3F8/IRQ4
Parallel Port Address
378
Parallel Port Mode
Normal
Parallel Port IRQ IRQ7
USB Functions Enabled
Legacy USB Support Enabled
OnBoard IDE Controller
Use this item to enable or disable the onboard IDE interface.