
43
USB Resume from S3 (Disabled)
Use this item to enable USB port activity to wakeup the system from a power
s aving mode.
KB Power ON Password (Enter)
Allows you to set the KB Power ON password.
Power Up by Alarm (Disabled)
When set to Enabled, the following three fields become available: Month
Alarm, Day of Month Alarm, and Time Alarm Upon arrival of the alarm time, it
will instruct the system to wake up. When set to 0 (zero) for the day of the
month, the alarm will power on your system every day at the specified time.
PNP/PCI Configuration Option
These options configure how PnP (Plug and Play) and PCI expansion cards
operate in your system. Both the ISA and PCI buses on the Mainboard use
system IRQs (Interrupt ReQuests) and DMAs (Direct Memory Access). You
must set up the IRQ and DMA assignments correctly through the PnP/PCI
Configurations Setup utility for the mainboard to work properly. Selecting
PnP/PCI Configurations on the main program screen displays this menu:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
PnP/PCI Configurations
Item Help
Reset Configuration Data
[Disabled ]
Resources Controlled by
[Auto(ESCD)]
x
IRQ Resources
Press Enter
PCI/VGA Palette Snoop
[Disabled]
Menu Level
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
-
¯
®
¬
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save
ESC: Exit
F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
Reset Configuration Data (Disabled)
If you enable this item and restart the system, any Plug and Play configuration
data stored in the BIOS Setup is cleared from memory.
Resources Controlled By (Auto(ESCD))
You should leave this item at the default Auto(ESCD). Under this setting, the
system dynamically allocates resources to Plug and Play devices as they are
required.
If you cannot get a legacy ISA (Industry Standard Architecture) expansion
card to work properly, you might be able to solve the problem by changing this
item to Manual, and then opening up the IRQ Resource submenu.