33
IDE devices. Choose Auto to let the system auto detect which PIO mode is
best, or s elect a PIO mode from 0 -4.
IDE Primary/Secondary Master/Slave UltraDMA (Auto)
Each IDE channel supports a master device and a slave device. This mai n-
board supports UltraDMA technology, which provides faster access to IDE
devices.
If you install a device that supports UltraDMA, change the appropriate item on
this list to Auto. You may have to install the UltraDMA driver supplied with this
mainboard in order to use an UltraDMA device.
IDE Burst Mode (Enabled)
This option, when enabled will instruct the system to send every write transac-
tion to the write buffer. Burstable trans actions then burst onto the PCI bus and
nonburstable transactions do not.
IDE DMA transfer access (Enabled)
This item is used to enabled the IDE DMA transfer command.
Press <Esc> to return to the Integrated Peripherals screen.
SIS OnChip PCI Device
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
SIS OnChip PCI Device
Item Help
SIS-7012 AC97Audio
[Enabled ]
SIS-7013 S/W Modem
[Enabled]
Menu Level
-
¯
®
¬
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save
ESC: Exit
F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
SIS-7012 AC97 AUDIO (Enabled)
Enables and disables the onboard audio chip. Disable this item if you are go-
ing to install a PCI audio add-on card.
SIS-7013 S/W Modem (Auto)
Enables and disables the onboard modem. Disable this item if you are going
to install an external modem.
Press <Esc> to return to the Integrated Peripherals screen.