27
Power Management Setup Page
This page sets some of the parameters for system power management opera-
tion.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
ACPI Aware O/S
Yes
Power Management/APM
Enabled
Video Power Down Mode
Suspend
Hard Disk Power Down Mode Stand By
Standby Time Out (Minute)
Disabled
Suspend Time Out (Minute)
Disabled
Resume On PME#/LAN/Ring Disabled
PowerOn by KBC
Disabled
Wake-Up Key
Any Key
Wake-Up Password
N/A
PowerOn by RTC Alarm
Disabled
RTC Alarm Date
15
RTC Alarm Hour
12
RTC Alarm Minute
30
RTC Alarm Second
30
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power management
Interface). Use this item to enable or disable the ACPI feature.
Power Management/APM
This item enables or disables a power management scheme. If you enable
power management, there are some options for you to decide the power
management operation. Both APM and ACPI are supported.
Video Power Down Mode
This item determines a required power-saving mode to power down the
graphics sub-system. You can force the graphics to power down in Stand By
or Suspend modes, or disable the power down.
Hard Disk Power Down Mode
This item determines a required power-saving mode to power down the hard
disk drive(s). You can force the hard disk to power down in Stand By or Sus-
pend modes, or disable the powerdown.
Standby Time Out (Minute)
This item sets up the timeout (minutes) for the Standby mode. The computer
will be a power-saving Standby mode if the system has been inactive after the
setup time.
Suspend Time Out (Minute)
This item sets up the timeout (minutes) for the Suspend mode. The computer
will be a power-saving Suspend mode if the system has been inactive after
the setup time.
