19
Note:
If you want to connect the front panel sound jack, you have to remove
jumper caps of Pin (5-6) and Pin (9-10) from the AUDIO1 header.
USB2/USB3/USB5: Extended USB module
The mainboard has USB ports installed on the rear edge I/O port array. Some
computer cases have a special module that mounts USB ports at the front of
the case. You can use auxiliary USB connectors USB2 and USB3 when the
mainboard does not incorporate the VT6202 chipset; Otherwise, use
USB5
when VT6202 chipset (supports the USB 2.0 specification) is onboard.
Pin
Signal Name
Pin
Signal Name
1
3
5
7
9
VERG_FP_USBPWR0
USB_FP_P0-
US
GROUND
KEY
2
4
6
8
10
VERG_FP_USBPWR0
USB_FP_P1-
USB_FP_P1-
GROUND
KEY
SIR1: Serial Infrared port
The mainboard supports a Serial Infrared (SIR1) data port. Infrared ports al-
low the wireless exchange of information between your computer and similarly
equipped devices such as printers, laptops, Personal Digital Assistants
(PDAs), and other computers.
Pin
Signal Name
Pin
Signal Name
1
2
3
NC
KEY
+5V
4
5
6
GND
IRTX
IRRX
AUX_IN1: AUX-IN connector
If you have installed a secondary CD-ROM drive or DVD-ROM drive, you can
connect the drive audio cable to the onboard sound system. On the mai n-
board, locate the 4-pin auxiliary audio-in header AUX_IN1 and connect the
cable to the connector.
Pin
Signal Name
Pin
Signal Name
1
3
AUX_L
AUD_GND
2
3
AUD_GND
AUX_L
