manualshive.com logo in svg

ECS H97I-DRONE, User Manual, Page: 20 / 86

Share
Download
ECS H97I-DRONE User Manual Download Page 20

Chapter 2

14

H97I-DRONE USER MANUAL

2-4-4. Installing Add-on Cards

The slots on this motherboard are designed to hold expansion cards and connect
them to the system bus. Expansion slots are a means of adding or enhancing the
motherboard’s features and capabilities. With these efficient facilities, you can
increase the motherboard’s capabilities by adding hardware that performs tasks
that are not part of the basic system.

PCIEX16 Slot

*

The PCI Express x16 slot is used to install an external PCI Ex-
press graphics card that is fully compliant to the PCI Express
Base Specification revision 3.0.

Before installing an add-on card, check the documentation for
the card carefully. If the card is not Plug and Play, you may have
to manually configure the card before installation.

The M.2 slot is for Wifi or Bluecard installing. It will provide high
transfer performance than original Mini PCIe interface.

M.2 Slot

Summary of Contents for H97I-DRONE























































































Reviews:

No comments