ECS G320, User Manual

Page: 75 / 103

Installing the VIA Service Pack
Before proceeding with the installation, please be reminded that you are required to install
the
VIA Service Pack.
•
•
•
•
Click the " My Computer " icon and locate the CD-ROM drive.
Click the " Driver " icon and select the " 4IN1 " icon.
Click on the 4in1Execution file (.exe) to proceed with the installation.
From the " VIA Service Pack X.XXV " display window, put a check mark on the " AGP
VxD Driver " and " VIA INF Driver ".
For WinME edition, there are only AGP VxD and VIA INF driver
allocated during the installation of the VIA Service Pack.
For Win2000 edition, the VIA PCI IDE Bus Driver is added aside
from the AGP VxD and VIA INF driver included in the WinME
edition.
•
•
•
•
•
•
Click on the " Next " button and follow the instructions displayed to proceed with the
instatllation.
Installing VGA Display Drivers
This section describes the operation and installation of VGA display software drivers
supplied on the Driver Utility CD-ROM that is shipped with your computer.
Insert the driver CD into your CD/DVD-ROM drive.
Click “Start” and select “Run”.
Type the following: D:\Driver\VGA\Win2K&XP\Setup.exe or
D:\Driver\VGA\WinME\Setup.exe (If D is not your CD/DVD-ROM drive, substitute D
with the correct drive letter).
Click on “Setup” to begin the Installation Wizard.
Follow the Wizard’s on-screen instructions to complete the installation.
73