ECS BAT-I3, User Manual, Page: 49 / 76

Chapter 3
BAT-I3 USER MANUAL
45
Super IO Chip (IT8786, IT8768)
This item shows the information of the super IO chip.
Super IO Configuration
Use this item to show the information of Super IO configuration.
Main Advanced Chipset M.I.B III Boot Security Exit
 
 

Main Advanced Chipset Tweak Boot Security Exit
Super IO Configuration
Super IO Chip IT8786, IT8768
Serial Port 1 Configutation
Serial Port 2 Configuration
Serial Port 3 Configuration
Serial Port 4 Configuration
Serial Port 5 Configuration
Serial Port 6 Configuration
Serial Port 7 Configuration
Serial Port 8 Configuration
Serial Port 9 Configuration
Serial Port 10 Configuration
Parallel Port Configuration
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Set Parameters of Serial Port
1 (COMA)
 
 

F1:General Help
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
    
    
    
    
    
 
  
 
 

 
 

    
    
Main Advanced Chipset Boot Security Exit

Serial Port 1 Configuration
Scroll to this item and press <Enter> to view the following screen:
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Serial Port 1 Mode (RS232 Mode)
Use this item to select the serial port 1 mode: RS232/RS422/RS485.
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Serial Port 1 Mode [RS232 Mode]
Serial Port 1 Speed [High]
ESC:Exit
F1:General Help
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
Main Advanced Chipset Boot Security Exit
Press <Esc> to return to the Super IO Configuration page.
Serial Port 1 Speed (High)
Use this item to select the serial port 1 speed: High/Low.