manualshive.com logo in svg

ECS BAT-I3, User Manual, Page: 37 / 76

Share
Download
ECS BAT-I3 User Manual Download Page 37

Chapter 3

BAT-I3 USER MANUAL

33

M/B Product Name (BAT-I3)

This item shows the information of the system product name.

Serial Number (00000000)

This item shows the information of the serial number.

System Manufacturer (ECS)

This item shows the information of the system system manufacturer.

System BIOS Version (1.0)

This item shows the information of the system BIOS version.

BIOS Release Date (08/22/2014)

This item shows the information of the BIOS release date.

Asset Tag (To Be Filled By O.E.M.)

This item shows the information of the serial tag.

Intel(R) Celeron(R) CPU J1900 @ 1.99GHz

This is display-only field and diaplays the information of the CPU installed in your
computer.

Processor Speed (2.00 GHz)

This item shows the information of the processor speed.

Memory Frequency (1333 MHz)

This item shows the information of the memory frequency.

Total Memory (4096 MB (LPDDR3))

This item shows the information of the total memory.

Summary of Contents for BAT-I3













































































Reviews:

No comments