41
Using BIOS
Removable Device Boot (Enabled)
This item enables or disables support the boot from USB mass storage devices.
Boot Sector Virus Protection (Disabled)
This page enables you to set setup administrator and password.
Security Menu
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed,
Installed
displays. If not,
Not Installed
displays.
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been
installed,
Installed
displays. If not,
Not Installed
displays.
HDD Password (Not Installed)
This item indicates whether a HDD password has been set. If the password has been
installed,
Installed
displays. If not,
Not Installed
displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Change HDD Password (Press Enter)
When the system is cold boot, you can select this option and press <Enter> to
access the sub menu to change the HDD password.
BIOS Setup Utility
Version 2.14.1219. Copyright (C) 2002-2012, Acer Inc.
Supervisor Password : Not Installed
User Password : Not Installed
HDD Password : Not Installed
Change Supervisor Password [Press Enter]
Change HDD Password [Press Enter]
Current TCM Status
NO TCM Hardware
Removable Device Boot [Enabled ]
Boot Sector Virus Protection [Disabled]
BIOS Write Protect [Disabled]
Valid Keys:
(1)a-z (A-Z) non case sensitive
(2)0, 1-9
(3)11 special keys:’-=[]\;’,./
(4)key pad: 0-9 support and
/*-+.(5 special keys)
(5)Only support scan code
+/-/Spacebar : Change Opt.
Enter : Select
F7: Load User default Settings
:Move
F8: Save as User Default
Settings
F9: Load Default Settings
F10: Save & Exit Setup
ESC: Discard changes and Exit
Setup
Main
Advanced
Power
Security
Boot Options
Exit
Enabled or disabled writes to Hard Disk Sector 0.
BIOS Write Protect (Disabled)
Use this item you can enable or disable the BIOS Write Protect.