15
Installing the Motherboard
Installing Memory Modules
This motherboard accommodates four memory modules. It can support four 240-pin
DDR3 1600/1333/1066. The total memory capacity is 16 GB.
You must install at least one module in any of the four slots.
DDR3 SDRAM memory module table
Installation Procedure
Refer to the following to install the memory modules.
1
This motherboard supports unbuffered DDR3 SDRAM .
2
Push the latches on each side of the DIMM slot down.
3
Align the memory module with the slot. The DIMM slots are keyed with
notches and the DIMMs are keyed with cutouts so that they can only be
installed correctly.
4
Check that the cutouts on the DIMM module edge connector match the
notches in the DIMM slot.
5
Install the DIMM module into the slot and press it firmly down until it
seats correctly. The slot latches are levered upwards and latch on to
the edges of the DIMM.
6
Install any remaining DIMM modules.
Do not remove any memory module from its antistatic packaging until
you are ready to install it on the motherboard. Handle the modules only
by their edges. Do not touch the components or metal parts. Always wear
a grounding strap when you handle the modules.
* For reference only
Memory module
Memory Bus
DDR3
1333
667 MHz
DDR3
1600
800 MHz
DDR3
1066
533 MHz