ECS A790GXM-AD3 Manual Download

Page: 42 / 72

Using BIOS

System Component Characteristics

These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,...etc.

•

CPU Temperature

•

System Temperature

•

CPU Fan Speed

•

System FAN Speed

•

PWR Fan Speed

•

CPU Vcore

•

VDIMM

Press <Esc> to return to the PC Health Status page.

DeltaT1 (+3)

SMART Fan Slope PWM value (4 PWM value/°C)

Press <Esc> to return to the main menu setting page.

Shutdown Temperature (Disabled)

Enable you to set the maximum temperature the system can reach before powering
down.

This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.

This item is used to set the Slope Select PWM of the smart fan.

Summary of Contents for A790GXM-AD3









































































Search results

Summary of Contents for A790GXM-AD3

Reviews:

Related manuals for A790GXM-AD3

Brands by name

Popular brands

ECS A790GXM-AD3, Manual

Search results

Summary of Contents for A790GXM-AD3

Reviews:

Related manuals for A790GXM-AD3

Brands by name

Popular brands