User Instructions for the
Sensor Evaluation Kit, SEK001, for Use with
TruStability™ RSC Series and Digital Output
Versions of the HSC Series and SSC Series Board
Mount Pressure Sensors
32324959
Issue B
Sensing and Internet of Things
1.0 OVERVIEW
The Sensor Evaluation Kit, SEK001, along with the readily-
available components shown in Table 1, and the free evaluation
software available on Honeywell’s website, comprise a simple
set of components used to evaluate Honeywell TruStability
RSC Series and the digital output versions (SPI or I
2
C) of the
TruStability HSC Series and SSC Series Board Mount Pressure
Sensors.
The SEK001 allows the user to obtain sensor readings without
needing to develop any code. The sensor to be evaluated
is mounted into the receiving sockets on the SEK001. The
SEK001 is then plugged in as a shield board to the Arduino™
Uno Rev3 Microcontroller Board. Honeywell evaluation
software, downloaded to the user’s PC, controls the Arduino
Uno Rev3 to take sensor readings that are then displayed on
the PC’s screen.
The readings may also be recorded to a .csv file for further
analysis, and, in the case of the RSC Series, used in the
equations found in the RSC Series datasheet.
In addition to being mounted directly on the SEK001, the
sensor may also be remotely connected to the SEK001 via wire
leads, allowing the sensor to be tested in adverse environments,
or in a prototype product for proof of concept testing.
2.0 SEK001 AND USER-PROVIDED COMPONENTS
2.1 Assemble the components shown in Table 1.
Table 1. Sensor Evaluation Kit Contents and User-Provided Items
1
Honeywell Sensor Evalution Kit, SEK001
User-Provided Components
Includes:
• Sensor Evaluation Board
• Five jumpers for
HSCDRRN001ND2A5
preconfigured on board
Arduino Uno Rev3 Microcontroller Board (A000066)
USB Interface Cable (Type A Male to Type B Male)
PC with Internet access
(Note: If using a docking station computer, ensure that the
computer is not in its docking station when installing and
running the software.)
1
The Honeywell RSC, HSC or SSC Series pressure sensor is not included with the SEK001. The user must purchase the sensor
separately.
Jumper
Jumpers
