ECS 945GCT-M2, Manual, Page: 45 / 50

39
Using BIOS
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the Setup
Utility and exit the Setup Utility. When the Save and Exit dialog box appears, select [OK]
to save and exit, or select [Cancel] to return to the main menu.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box appears,
select [OK] to discard changes and exit, or select [Cancel] to return to the main menu.
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been installed,
Installed displays. If not, Not Installed displays.
Change User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password. This item will show if Supervisor Password is set.
User Password
This page helps you install or change a password.
Install or Change the
password.
Help item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
User Password
Press <Esc> to return to the main menu setting page.
Security Settings
User Password : Not Installed
Change User Password Press Enter
F10: Save and Exit +/-/: Value Enter : Select
ESC: Exit
F9: Optimized Defaults F1:General Help
: Move
mnlk
If you have made settings that you do not want to save, use the “Discard Changes
and Exit” item and select [OK] to discard any changes you have made.