ECS 945GCT-M2, Manual, Page: 28 / 50

22
Installing the Motherboard
Connecting I/O Devices
The backplane of the motherboard has the following I/O ports:
PS2 Mouse
PS2 Keyboard
Serial Port (COM1)
VGA Port
LAN Port
Use the upper PS/2 port to connect a PS/2 pointing device.
Use the lower PS/2 port to connect a PS/2 keyboard.
Use the COM port to connect serial devices such as mice or fax/
modems.
Connect your monitor to the VGA port.
Use the USB ports to connect USB devices.
Use the three audio ports to connect audio devices. The first jack
is for stereo line-in signal. The second jack is for stereo line-out
signal. The third jack is for microphone.
Connect an RJ-45 jack to the LAN port to connect your com-
puter to the Network.
USB Ports
Audio Ports
This motherboard may adopt 8-channel audio ports that corre-
spond to the A, B, C, and E port respectively. In addition, all of the
3 ports, B, C, and E provide users with both right & left channels
individually. Users please refer to the following note for specific
port function definition.
The above port definition can be changed to audio input or audio
output by changing the driver utility setting.
A: Center & Woofer D: Line-in
B: Back Surround E: Front Out
C: Side Surround F: Mic_in Rear