ECS 945GCT-M2, Manual, Page: 44 / 50

38
Using BIOS
DRAM Frequency (Auto)
This item shows the frequency of the DRAM in your computer.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Disabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Press <Esc> to return to the main menu setting page.
Load Optimal Defaults
This option opens a dialog box that lets you install optimized defaults for all appropriate
items in the Setup Utility. Press <Y> and then <Enter> to install the defaults. Press <N>
and then <Enter> to not install the defaults. The optimized defaults place demands on the
system that may be greater than the performance level of the components, such as the
CPU and the memory. You can cause fatal errors or instability if you install the optimized
defaults when your hardware does not support them. If you only want to install setup
defaults for a specific option, select and display that option, and then press <F7>.
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has been
installed,
Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password.
Supervisor Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Install or Change the
password.
Help item Security Settings
Supervisor Password : Not Installed
Change Supervisor Password Press Enter
F10: Save and Exit +/-/: Value Enter : Select
ESC: Exit F9: Optimized Defaults
F1:General Help
: Move
mnlk
Press <Esc> to return to the main menu setting page.