34
Motherboard User’s Guide
Keyboard Power On
If you enable this item, system can automatically resume by
pressing any keys or power key on the keyboard, or typing in the
password. You must use an ATX power supply in order to use this
feature.
Primary Graphics Adapter
You can use this item to select AGP Express, OnChip VGA or
PCI as the primary graphics adapter.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We
recommend you to leave this item at the default value.
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the
PCI bus and those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
PCI / Plug and Play Setup
Primary Graphics Adapter
AGP Express
Allocate IRQ to PCI VGA
Yes
PCI IDE BusMaster
Disabled
Help Item
Select which
graphics controller
to use as the
primary boot device.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
