15
Chapter 2: Motherboard Installation
Connect the power connector from the power supply to the
ATX2
connector on the motherboard. The
ATX3
is a +12V connector
for CPU Vcore power.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the
SYSFAN
fan power connector
on the motherboard.
Connect the case switches and indicator LEDs to the
PANEL1
header.
Install the Motherboard
Install the motherboard in a system chassis (case). The board is a
Micro ATX size motherboard. You can install this motherboard in
an ATX case. Make sure your case has an I/O cover plate
matching the ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer’s
instructions to use the hardware and internal mounting points on
the chassis.
ATX3
SYSFAN
PANEL1
ATX2
1
1