27
Chapter 3: BIOS Setup Utility
Standard CMOS Setup Page
This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Standard CMOS Setup
Date & Time
These items set up system date and time.
Primary IDE Master/Primary IDE Slave/Secondary IDE
Master/Secondary IDE Slave
Use these items to configure devices connected to the Primary
and Secondary IDE channels. To configure an IDE hard disk
drive, choose
Auto
. If the
Auto
setting fails to find a hard disk
drive, set it to
User
, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM drive,
select the setting
CDROM
. If you have an ATAPI device with
removable media (e.g. a ZIP drive or an LS-120), select
Floptical
.
S-ATA0/1 Master
These items configure devices connected to the Serial ATA
channels. To configure a S-ATA hard disk drive, choose
Auto
.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
System Time
00:01:25
System Date
Thu 05/06/2004
Primary IDE Master
Hard Disk
Primary IDE Slave
Not Detected
Secondary IDE Master
Not Detected
Secondary IDE Slave
ATAPI CDROM
S-ATA0 Master
Not Decteted
S-ATA1 Master
Not Detected
Floppy A
1.44 MB 3 1/2”
Floppy B
Disabled
Help Item
User [Enter], [TAB] or
[SHIFT-TAB] to select a
field.
Use [+] or [-] to configure
system time.