ECS 865G-M8, User Manual

Page: 47 / 88

41
Using BIOS
Power Management Setup
This option lets you control system power management. The system has various power-
saving modes including powering down the hard disk, turning off the video, suspending to
RAM, and software power down that allows the system to be automatically resumed by
certain events.
The power-saving modes can be controlled by timeouts. If the system is inactive for a time,
the timeouts begin counting. If the inactivity continues so that the timeout period elapses,
the system enters a power-saving mode. If any item in the list of Reload Global Timer
Events is Enabled, then any activity on that item will reset the timeout counters to zero.
If the system is suspended or has been powered down by software, it can be resumed by a
wake up call that is generated by incoming traffic to a modem, a LAN card, a PCI card,
or a fixed alarm on the system realtime clock
Item Help
Menu Level
f
ACPI Suspend Type [S3 (STR)]
Run VGABIOS if S3 Resume [Auto]
Video Off Method [DPMS]
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Modem Use IRQ [3]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-Off by PWR-BTTN [Instant-Off]
Resume by PCI PME [Enabled]
Resume by Ring [Disabled]
Resume by USB (S3) [Disabled]
Resume by Alarm [Disabled]
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 0 0
** Reload Global Timer Evernts **
Primary IDE 0 [Disabled]
Primary IDE 1 [Disabled]
Phoenix-AwardBIOS CMOS Setup Utility
Power Management Setup
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
mnlk
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
x
x
12
12
12
12
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S1 (POS), the suspend
mode is equivalent to a software power down. If you select S3 (STR), the suspend mode is
suspend to RAM, i.e., the system shuts down with the exception of a refresh current to the
system memory.
Run VGABIOS if S3 Resume (Auto)
Use this item to initialize the VGA BIOS from S3 (Suspend to RAM) sleep state.
Video Off Method (DPMS)
This item defines how the video is powered down to save power. This item is set to DPMS
(Display Power Management Software) by default.
Video Off In Suspend (Yes)
This option defines if the video is powered down when the system is put into suspend mode.