37
Using BIOS
Press <Esc> to return to the main menu setting page.
Power Mangement Setup
This page sets up some parameters for system power management operation.
Select the ACPI
state used for
System Suspend.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Power Management Setup
ACPI Suspend Type
S3
Soft-off by PWR-BTTN
Delay 4 Sec
PWRON After PWR-Fail
Power Off
Resume on Lan
Disabled
Wake-Up by PME
Enabled
Power On by Ring
Disabled
USB KB Wake Up from S3
Disabled
PS2 Keyboard Wakeup
Disabled
PS2 Mouse Wakeup
Disabled
Resume on RTC Alarm
Disabled
ESC: Exit
Serial Port2 Mode (Normal)
If Serial Port 2 Address is not disabled, it allows you to set the Serial Port 2 Mode.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port address.
Parallel Port Mode (ECP)
Use this item to select the parallel port mode. You can select Normal (Standard Parallel
Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or BPP (Bi-
Directional Parallel Port).
ECP Mode DMA Channel (DMA3)
Use this item to assign the DMA Channel under ECP Mode function.
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
F10: Save
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move