13
Chapter 2: Motherboard Installation
Pin
Signal
Pin
Signal
1
VERG_FP_USBPWR0
2
VERG_FP_USBPWR0
3
USB_FP_P0(-)
4
USB_FP_P1(-)
5
USB)
6
USB)
7
GROUND
8
GROUND
9
KEY
10
NC
Pin
Signal
Pin
Signal
1
NC
2
KEY
3
+5V
4
GND
5
IRTX
6
IRRX
JUSB1/JUSB2: Front panel USB Headers
The motherboard has USB ports installed on the rear edge I/O port array.
Additionally, some computer cases have USB ports at the front of the case. If
you have this kind of case, use auxiliary USB headers JUSB1/JUSB2 to connect
the front-mounted ports to the motherboard.
1.
Locate the JUSB1/JUSB2 header on the motherboard.
2.
Plug the bracket cable onto the JUSB1/JUSB2 header.
3.
Remove a slot cover from one of the expansion slots on the system
chassis. Install an extension bracket in the opening. Secure the
extension bracket to the chasis with a screw.
IR1: Infrared Header
The infrared port allows the wireless exchange of information between your
computer and similarly equipped devices such as printers, laptops, Personal
Digital Assistants (PDAs), and other computers.
1.
Locate the infrared port-
IR1
header on the motherboard.
2.
If you are adding an infrared port, connect the ribbon cable from the
port to the IR1 header and then secure the port to an appropriate
place in your system chassis.