11
Chapter 2: Motherboard Installation
Pin
Signal
Pin
Signal
1
HD)
2
FP PWR/SLP(+)
3
HD_LED_N(-)
4
FP PWR/SLP(-)
5
RESET_SW_N(-)
6
POWE)
7
RESE)
8
POWER_SW_N(-)
9
RSVD_DNU
10
KEY
Install the Motherboard
Install the motherboard in a system chassis (case). The board is a Micro ATX
size motherboard. You can install this motherboard in an ATX case. Make sure
your case has an I/O cover plate matching the ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer’s instructions to
use the hardware and internal mounting points on the chassis.
ATX1
Connect the power connector from the power supply to the
ATXPW1
connector
on the motherboard. The
ATX1
is a +12V connector for CPU Vcore power.
If there is a cooling fan installed in the system chassis, connect the cable from the
cooling fan to the
CHSFAN
fan power connector on the motherboard.
Connect the case switches and indicator LEDs to the
SW1
header. Here is a list
of the SW1 pin assignments.
ATXPW1
1
SW1
CHSFAN
1